• HRK0.00 HRK
    0

Panasonic PT-DS12KEJ

Be the first to review this product

12000 ANSI Lumens

Availability: In stock

Price :
VPC (bez PDV-a) : HRK178,613.75 MPC (s PDV-om) : HRK223,267.19
HRK

Details

Model PT-DS12KEJ
Power supply 120 V, 220-240 V AC, 50/60 Hz
Power consumption 120 V AC 980 W (1,010 VA)
(0.2 W with standby mode set to eco.*1
6 W with standby mode set to normal. Both with fan stopped.)
220-240 V AC 950 W (980 VA)
(0.3 W with standby mode set to eco.*1
9 W with standby mode set to normal. Both with fan stopped.)
Dissipation BTU 120 V: 3,345 BTU/hour (without light output: 3,181 BTU/hour).
220–240 V: 3,242 BTU/hour (without light output: 3,079 BTU/hour)
DLP™ chip Panel size 24.1 mm (0.95 in) diagonal (4:3 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Lens Optional powered zoom/focus and fixed-focus lenses
Lamp 380 W UHM lamps (HIGH mode) x 2
Screen size (diagonal) 1.78 –25.4 m (70–1,000 in), 1.78 –15.24 m (70–600 in) with the ET-D75LE8, 4:3 aspect ratio
Brightness*2 12,000 lm*3 (dual-lamp)
Center-to-corner uniformity*2 0.9
Contrast*2 10,000:1 (full on/off, with DYNAMIC IRIS set to "3")
Resolution 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Scanning frequency SDI Dual-link HD-SDI SMPTE ST 372 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF
3G-SDI SMPTE ST 424 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
HD-SDI SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SD-SDI SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
HDMI/DVI-D 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA*4 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25–162 MHz
RGB fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/Y/C fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5 Vertical ±50 % (±40 % with the ET-D75LE6) from center of screen (powered)
Horizontal ±30 % (±20 % with the ET-D75LE6) from center of screen (powered)
Keystone correction range Vertical: ±40°*6, horizontal: ±15°
Keystone correction range with optional Upgrade Kit ET-UK20 Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20, vertical ±45° and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40, vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50, vertical ±28° and horizontal ±15° with the ET-D75LE6
Installation Ceiling/floor, front /rear, portrait*7
Terminals SDI 1 IN BNC x 1 (3G/HD/SD-SDI)
SDI 2 IN BNC x 1 (HD/SD-SDI)
3D SYNC IN/OUT BNC x 1 (3D timing signal)
3D SYNC OUT BNC x 1 (3D timing signal)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials Molded plastic
Dimensions (W x H x D) 530 x 200*8 x 548.5 mm (20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included)
Weight*9 Approximately 24 kg (52.9 lbs) (optional lens not included)
Operation noise*2 45 dB (dual lamp operation with lamp HIGH mode), 43 dB (dual lamp operation with lamp MIDDLE mode), 37 dB (dual lamp operation with lamp ECO mode)
Operating environment Operating temperature: 0–45°C (32–113°F)*10, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer 139, Multi Projector Monitoring & Control 139, Geometry Manager Pro (included in the ET-UK20)
Supplied accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)
NOTE * Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is PT-DZ13KU and PT-DS12KU. The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-DS12KE and PT-DS12KE.
The product number for the direct shipments to Europe is PT-DS12KEJ and PT-DS12KEJ.

*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 In Portrait mode, the maximum brightness becomes 10,600 lm.
*4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5 Optical axis shift cannot be operated with the ET-D75LE50.
*6 ±22° with the ET-D75LE50, ±28° with the ET-D75LE6.
*7 Requires optional lamp units for portrait mode.
*8 With legs at shortest position.
*9 Average value. May differ depending on the actual unit.
*10 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. WITH THE ET-LAD320P/LAD320PW MOUNTED FOR THE PORTRAIT MODE: The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F). The operating temperature range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F), and the projector cannot be used in places at high altitude.

Additional Information

Short description homepage No
Manufacturer Panasonic
Badge: New No
Badge: action No
Badge: recommendation N/A

Write Your Own Review

You're reviewing: Panasonic PT-DS12KEJ

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Custom Tab Content 1

Custom Variants and Options let you create product customization options and fields quickly and easily. Any product can have custom variants and options this can be configured in its product configuration. Custom variants and options can be created for products as required or non-required options. They can affect the total price of the product by a fixed amount or percentage.
In other words, custom variants and options allow you to make products that are unique and individualized. Whether its a gift with a special message, a sweatshirt with custom embroidered text, or anything in between possibilities are limitless.

Custom Tab Content 2

Custom Variants and Options let you create product customization options and fields quickly and easily. Any product can have custom variants and options this can be configured in its product configuration. Custom variants and options can be created for products as required or non-required options. They can affect the total price of the product by a fixed amount or percentage.
In other words, custom variants and options allow you to make products that are unique and individualized. Whether its a gift with a special message, a sweatshirt with custom embroidered text, or anything in between possibilities are limitless.

Related products

There are no products matching the selection.