Dji MATRICE 600
Main features of the DJI Matrice 600:
- Complete integration
- Intelligent flight safety
- Extended flight time and increased transmission range
- Professional HD transmission
- Powerful app control
- Open to development
1 x Centerframe (with A3 and Lightbridge 2 Air System)
6 x Frame Arm (with propeller bracket)
2 x Landing Gear Leg
2 x Landing Gear Skid
1 x Retractable Module (Left)
1 x Retractable Module (Right)
2 xRetractable Module Mounting Rod
2 x Retractable Module Bracket
1 x Remote Controller
6 x Intelligent Flight Battery (TB47S)
2 x Charging Hub
2 x Spring
2 x Battery Charger
2 x Power Supplies
1 x Micro USB Cable
1 x GPS Compass Pro
1 x GPS Mount
6 x Arm stopper
2 x Landing Gear stopper
6 x buttons with sealing
double-sided tape Set
screw (M2x4 M3x5.5, M3x5.5 (square), M3x6.4, M3x8, M3x12
The modular design of the M600 makes it particularly easy to set it up in just a few minutes. The dustproof seal makes it easy to maintain the system and its motors, which are constantly cooled during use, ensure reliable performance, even over long periods. It supports all Zenmuse cameras and gimbals and thanks to a maximum payload weight of 6kg, it can carry the Ronin MX Gimbal and a variety of cameras, from Micro Four Thirds systems to the RED Epic.
INTELLIGENT AIR SAFETY
The M600 uses electronic speed controllers (ESCs) with a sinusoidal drive to ensure its performance is accurate, safe and efficient. During this, the self-adapting flight system of the A3 automatically adjusts the parameters according to load weight. The A3 can be extended with two additional GNSS units and inertial navigation systems to the A3 Pro, or with D-RTK GNSS * for improved accuracy.
With a three-dimensional modular redundancy and diagnostic algorithms that compares the sensory data of the three units in real-time, the M600 flies as expected.
The A3 GNSS system can be expanded with the real-time kinematic technology from DJI for a centimeter-accurate positioning. Its flight direction reference is based on two antennas and is more precise than a compass sensor because it is not susceptible to magnetic interference from metal structures.
EXTENDED AIRCRAFT AND ENLARGED TRANSMISSION
The M600 allows extended flight times and a range of 5km * and thanks to an ultra low latency in the HD image transmission, accurate image composition and capture can be ensured. It uses 6 small DJI Intelligent Batteries and can be easily transported wherever it is needed. With the help of a special energy management system and a power distribution system, all 6 batteries can be switched on with just one push of a button and the system stays even in the air when a battery fails. Users can check the battery status in real time during the flight.
PROFESSIONAL HD TRANSMISSION
DJI Lightbridge 2 has been built from the ground up to meet the demands of professional broadcasting, with high picture quality and HD live streaming. USB, mini-HDMI and 3G SDI connectors supported video output up to 1080/60 fps or 720p / 59.94fps and 1080i / 50fps standard output.
POWER CONTROL APPLICATION
The DJI M600 supports the DJI GO app and the brand new DJI Assistant 2. Check a live HD view, battery status, redundancy status, transmission strength and much more, directly with the DJI GO app. Camera settings such as exposure time, ISO, photo or video recording with all Zenmuse X models and remote focus and iris control with the Zenmuse X5 and X5R cameras can also be controlled by DJI GO. The DJI Assistant 2 supports firmware updates and the new Ground Station and comes with a built-in flight simulator.
OPEN TO DEVELOPMENT
The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the needs of industrial applications. It has two parallel CAN and API connections and can thus be connected to DJI devices such as the Guidance Sensorsystem, the RTK GNSS unit and components from other providers.