DJI Ronin-MX

SKU
DJI Ronin-MX
€1,669.49 €1,335.59
In stock
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.
DJI
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.
Performance
Load Weight (Reference Value) 10 lb / 4.5 kg
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 200°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°
Tilt Axis Control: +270° to -150°
Roll Axis Control: ± 110°
Controlled Rotation Range Pan Axis Control: 360°
Tilt Axis Control: +45° to -135°
Roll Axis Control: ± 25°
Electrical and Mechanical
Sensors Temperature sensor
Processing 32-Bit DSP Processor
Expandability D-Bus receiver supported
Working Current Static Current: 300 mA (at 16 V)
Dynamic Current: 600 mA (at 16 V)
Locked Motor Current: Up to 10 A (at 16 V)
Receiver
Frequency 2.4 GHz
Transmitter
Frequency 2.4 GHz
Connectivity
Wireless Bluetooth 4.0
Wired 1 x USB 2.0
GCU
Power Requirements 4S Ronin-M battery
System Requirements
Assistant Software Windows XP or above
Mac OS X 10.9 or above
iOS 7.1 or above
Android 4.3 or above
General
Control Modes Underslung Mode
Upright Mode
Briefcase Mode
Aerial Mode
Jib or Wirecam Mode
Accessory Power Ports 2 x 12 V Regulated P-Tap 
1 x USB 500 mW 
1 x DJI Lightbridge
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 4.7" / 120 mm
Maximum height measured from top of camera base plate: 7.7" / 195 mm
Maximum width: 6.3" / 160 mm
Operating Temperature 5 to 120°F / -15 to 50°C
Dimensions (W x D x H) Excluding Handle Bar: 11 x 14.6 x 13.4" / 280 x 370 x 340 mm
Including Handle Bar: 22 x 14.6 x 17.3" / 560 x 370 x 440 mm
Weight Including Handle Bar: 6.11 lb / 2.77 kg
Including Vibration Damper: 4.74 lb / 2.15 kg